PEEK薄膜：VICTREX PEEK provides material solutions for designers seeking extruded film that withstands harsh environments,provides high purity,possesses excellent dimensional stability over a wide temperature range,provides ease of fabrication,and that can be modified with fillers to enhance stiffness,tribological properties, and sealability.VICTREX PEEK provides excellent properties even without fillers,additives,or modifications.

薄膜關鍵特性:

·                               高耐熱性 :25-125微米（1-5mil）厚度的薄膜在無沖擊情況下機械用途的UL RTI等級為220℃,，電氣用途的UL RTI等級為200℃,，并能夠承受無鉛焊接高達300℃的工藝溫度。

·                               優異的耐磨性 ：固有的潤滑性,，可有非常光滑表面處理,，顆粒生成低。即使不加潤滑劑,，LPV（極限壓力速度值）等級達145MPa m/min(69.000psi-ft/min)

·                               低吸濕性:防止?jié)駳鈱?duì)電氣性能和尺寸穩定性造成不利影響,。

·                               高純度

·                               廣泛的耐化學腐蝕性：不溶于一般溶劑。對酸,、堿,、氧化劑,、碳?xì)浠衔铩Ⅺ}及蒸汽具有很強的耐受性,。耐化學性高于許多特種金屬,。即使在200℃蒸汽里暴露2000小時后，其性能仍能保持穩定不變,。

·                               環境友好 ：輕巧,、可回收、不含鹵素,，滿足ROHS要求,。

·                               高強度，高韌性 ：在所有熱塑性塑料中具有比較高的柔韌性,。

·                               電氣穩定性

·                               抗輻射性

·                               煙和有毒氣體排放量低

·                               FDA及奶制品3A級認證

·                               出色的抗?jié)B透性能

·                               優異的聲學性能